Mitsumi electronic WD3300U Projector User Manual


  Open as PDF
of 52
 
EN-48
Troubleshooting (continued)
If the following problem occurs after the lamp is replaced, check the following first.
Problem Solution
The projector does not
turn on.
• Fitthelampcoversecurely.(Seepages42and43.)
• Resetthelampoperatingtime.(Seepage43.)
The STATUS indicator
blinks.
• Resetthelampoperatingtime.(Seepage43.)
Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System for instructions on how to use it to secure the
projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone:+1-(650)572-2700 Fax:+1-(650)572-9675
 previous next