Mitsumi electronic WD3300U Projector User Manual


  Open as PDF
of 52
 
EN-30
INSTALLATION menu
INSTALLATION
opt.
LAMP MODE
OFF
AUTO POWER
ON
STANDARD
STANDBY MODE
STANDARD
ON
SPLASH SCREEN ON
AUTO POWER
OFF
OFF
BACK COLOR
BLUE
OFFIMAGE REVERSE
BLACK
AV MUTE MODE
IMAGE CAPTURE GO
LENS LOCK
OK
INSTALLATION
LENS LOCK
opt.
OFF
OFF
OK
ZOOM/FOCUS
LOCK
LENS SHIFT LOCK
LENS SHIFT
RESET
ITEM SETTING FUNCTION
LAMP MODE STANDARD Select this option when you want to view images in a well-lit room.
LOW Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
STANDBY MODE STANDARD Select this option when you control the projector via LAN during power
standby.
LOW Select this option when you don’t control the projector via LAN during power
standby. This option disables the LAN terminal and reduces the power
consumption during the power standby.
AUTO POWER ON ON / OFF When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
• Theprojectorisinthestand-bymodewhenthelampisoff.Usethe
remote control to turn on the lamp.
AUTO POWER OFF OFF / 5-60min Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
IMAGE CAPTURE GO Use to capture the screen for the splash screen. (See page .37.)
SPLASH SCREEN ON / OFF Choose ON to display the splash screen when the power is turned on.
• Thesplashscreencanbechanged.(Seepage37.)
BACK COLOR BLUE / BLACK /
IMAGE
Use to select the background from among BLUE, BLACK and IMAGE, which
will be displayed when there is no signal input from the source. When IMAGE
is selected, the splash screen will be displayed.
AV MUTE MODE BLACK / IMAGE Use to choose the background, either BLACK, or IMAGE, which will be
displayed when the AV MUTE button is pressed. When IMAGE is chosen, the
splash screen will be displayed.
IMAGE REVERSE OFF Select when viewing images from the front with the projector installed on the
floor.
MIRROR Select when viewing images projected from the behind of the screen with the
projector installed on the floor.
INVERT Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
MIRROR INVERT Select when viewing images from the front with the projector installed on the
ceiling.
LENS LOCK OK The LENS LOCK menu is displayed for the following settings.
ZOOM/FOCUS LOCK
ON / OFF Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
LENS SHIFT LOCK ON / OFF Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RESET OK Use to reset the position of the lens to the factory setting.
• RegardlessofthesettingofLAMPMODEintheINSTALLATIONmenu,theSTANDARDlampmodeisactivatedbydefault
whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to
LOW about 1 minute after turn-on.
• Whenthelampmodeisswitched,theprojectedimagemayicker.
• Frequentswitchingofthelampmodemaydamagethelamp.
• Youcan’tsetIMAGECAPTUREandSPLASHSCREENwhenPASSWORDFUNCTIONintheFEATUREmenuhasbeensetto
SPLASH ID SCREEN to enable the password lock.
• WhenyoucontinueprojectionforalongtimewithBACKCOLORorAVMUTEMODEsettoIMAGE,anafterimagemaypersist
on the screen. Consult your dealer in this case.
Menu operation (continued)
 previous next