Filter
Top Products
Lower DIP Switches
12345678
Flow Control
XON/XOFF
RTS/CTS*
DTR
ON
OFF
OFF
OFF
ON
OFF
Diagnostics
Normal
Diagnostics Mode
OFF
ON
Verifier
No Verifier
Verifier Installed
OFF
ON
Supply Type**
Die Cut or Edge
Aperture
Black Mark (center)
Continuous
Center Aperture
OFF
OFF
ON
ON
OFF
ON
OFF
ON
Ribbon
Transfer
Direct
OFF
ON
Feed Mode
Disable On-Demand
Enable On-Demand
OFF
ON
* Requires a special cable.
** Aperture supplies are tags or labels with holes (or openings) in them.
The supply is sensed using the holes. The holes can be only on the
edge or in the center of the supply. If your aperture supply has holes (or
openings) on the edge, set the DIP switches for edge aperture supplies.
If your aperture supply has holes in the center, set the DIP switches for
center aperture supplies.
1-6 Getting Started
Rev. B 12/97