Filter
Top Products
224 Bar code Intercharacter gap must be 0 to 99 in printer
dots.
251 Power up mode must be 0 (online) or 1 (offline).
252 Language selection must be 0 (English).
253 Batch separator code must be 0 (off) or 1 (on) in the
system setup packet.
254 Slash zero selection must be 0 (standard zero) or 1
(slash zero).
255 Supply type must be 0 (black mark) or 1 (die cut).
256 Ribbon selection must be 0 (direct) or 1 (transfer).
257 Feed mode must be 0 (continuous) or 1 (on-demand).
258 Supply position is outside the range.
259 Contrast adjustment must be -390 to 156 dots.
260 Print adjustment must be -99 to 99 dots.
261 Margin adjustment must be -99 to 99 dots.
262 Speed adjustment is invalid.
263 Primary monetary symbol is invalid.
264 Secondary symbol selection must be 0 (none) or 1
(print secondary sign).
265 Monetary decimal places must be 0 to 3.
266 Character string length in Packet E must be 5 (MPCL
control characters) or 7 (ENQ/IMD command character).
267 Baud rate selection must be 0 (1200), 1 (2400), 2
(4800), 3 (9600), 4 (19.2), or 5 (38.4).
268 Word length selection must be 0 (7 bits) or 1 (8 bits).
6-8 Troubleshooting
Rev. B 12/97