Filter
Top Products
Connecting the Power Cable
To connect the power cable:
1. Plug the power cable into the socket. Plug the other end of
the cable into a grounded electrical outlet.
2. Turn on the printer. Press ( I ) to turn on and ( O ) to turn off
the printer.
For information about replacing the fuse, see Chapter 5,
"Care and Maintenance."
Establishing Communications
Before the printer can accept print jobs from the host, you must:
◆
Connect the communication cable to the printer and to the
host.
◆
Set the communication values on the printer to match those at
the host. (Only required if you are using the serial port.)
Power Cable
goes here
Parallel Port
Serial Port
Getting Started 1-3
Rev. B 12/97