Filter
Top Products
High Energy Ribbon Limitations
When using the high energy ribbon option:
◆
Use a print speed of 2.5IPS (inches per second).
◆
Printhead warranty is reduced to 100,000 inches.
◆
Serial bar codes cannot be printed.
◆
Do not use peel mode.
◆
No more than 20% of the supply should have print (black
coverage).
CAUTION
The high energy ribbon may break or stick to the
supply when more than 20% of the supply
contains print.
◆
Only white high energy supply should be used for bar code
printing.
◆
Reverse fonts cannot be used.
◆
A non-printing area of at least .1 inch (2.54 mm) must exist on
the left and right edge of the ribbon.
◆
Do not print horizontal lines or bars.
◆
Graphics are limited.
Loading Ribbon 3-7
Rev. B 12/97