Filter
Top Products
Supplies
For high temperature or high humidity environments, contact
Monarch for supply recommendations. Non-indexed supply does
not have perforations or black marks and must be used in
continuous mode. Use continuous supply with the optional tear
bar or the optional knife.
Supply Types: Thermal Transfer or Direct
Supply Widths: .75 inches (19 mm) minimum
4.25 inches (108 mm) maximum
Supply Lengths: .75 inch (19 mm) minimum
16.0 inches (406 mm) maximum
Ribbon Specification
Ribbon Storage: Do not leave ribbon in direct sunlight, high
temperatures, or high humidity.
Ribbon Type: Standard or High Energy
Ribbon Widths: 1.3 inches (33 mm)
1.6 inches (41 mm)
2.16 inches (55 mm)
3.15 inches (80 mm)
4.13 inches (105 mm)
Ribbon Length: 23,600 inches (600 meters)
About Ribbons
The width of the ribbon must be greater than the supply width.
Since some supplies are more abrasive to printheads than others,
using a ribbon wider than your supply helps protect the printhead.
Replacement printheads are expensive.
A-2 Specifications & Accessories
Rev. B 12/97