Filter
Top Products
Error Messages
You may receive the following types of error messages:
◆
Data Errors
◆
Communication Errors
Some errors numbered 400-438 and 500-574 are internal
software errors. Errors numbered 900-999 are hard printer
failures. If you cannot clear an error, turn off the printer, wait
several seconds and then turn on the printer. Call Technical
Support if you receive any error message not listed in this chapter.
Data Errors
Errors 001 to 405 and 429 to 435 are data errors. This type of
error indicates that incorrect data was sent to the printer, and the
printer is ignoring it. Your System Administrator should correct
the packet and send it back to the printer.
Error Description/Action
001 Format ID number must be 1 to 999.
002 Name must be 1 to 8 characters inside quotes.
003 Action must be A (add) or C (clear).
004 Supply length is invalid.
005 Supply width is invalid.
006 Storage device must be R (volatile RAM).
007 Unit of measure must be E (English), M (Metric), or G
(Dots).
010 Field ID number is outside the range 0 to 999.
011 Field length exceeds 2710.
6-4 Troubleshooting
Rev. B 12/97