Filter
Top Products
User Guide
60
Command: &Zy
=x
Store Dialing Command
Values:
y
= 0–3 (callback security disabled) or 0–29
(callback security enabled)
x = Dialing command
Default: None
Description: Stores dialing command
x
in memory location
y
.
Dial the stored number using the command
ATDS=y. See also the
#CBSn
command. For
callback security options, see Chapter 6.
Command: &&S Speaker Codec Loopback
Values: n/a
Description: Provides a loopback from the microphone to the
speaker.
For testing and debugging only.
Command: \A
n
Select Maximum MNP Block Size
Values:
n
= 0, 1, 2, or 3
Default: 3
Description: \A0 64-character maximum.
\A1 128-character maximum.
\A2 192-character maximum.
\A3 256-character maximum.
Command: \B
n
Transmit Break
Values:
n
= 0–9 in 100 ms units
Default: 3
Description: In non-error-correction mode only, sends a break
signal of the specified length to a remote modem.
Works in conjunction with the
\K
command.