Filter
Top Products
2 Installation
MT5634ZPX-PCI 19
Installing Drivers
1. Plug in and turn on your computer. As your computer boots, it
automatically detects the MultiModemZPX-PCI, and the New
Hardware Found dialog box appears.
2. In the New Hardware Found dialog box, select Driver from
disk provided by hardware manufacturer (default selection).
Then click OK. The Install from Disk dialog box appears.
3. Insert the MultiModemZPX-PCI Drivers diskette into the
computers drive, select the drive letter (A:\ is the default), and
click OK. The computer installs the software drivers needed to
communicate with your MultiModemZPX-PCI and then displays
the Windows 95 desktop.
4. Installation of the MultiModemZPX-PCI is complete. If you plan
to use the provided communications software, install it now
according to the instructions provided in your corresponding
software manual.
Verifying Configuration
Windows 95 Plug and Play
Use the following procedure to check the assignments Windows has
made for your modem:
1. Click Start, Settings, Control Panel, and then double-click the
System icon.
2. When the System Properties dialog box appears, click the Device
Manager tab. A list of device types appears.
3. Double-click Modem for a list of modems installed in your
computer.
4. Double-click Multi-Tech MT5634ZPX-PCI. The Modem
Properties dialog box for your MultiModemZPX-PCI model
appears.