Filter
Top Products
Owner’s Manual
20 MT5634ZPX-PCI
5. Click the Resources tab and note the Conflicting Device list. If
there is a conflict between your modem and another device in your
computer, the information appears here. For help in resolving a
conflict, click Start, Help, and then search the Help index for the
Hardware Conflict Troubleshooter. When finished, click OK to
exit the System Properties dialog box.
6. In Control Panel, double-click the Modems icon.
7. When the Modems Properties dialog box appears, click the
Diagnostics tab. A list of ports and the devices installed on
them appears.
8. Click the COM port where the Multi-Tech MT5634ZPX-PCI is
installed. Then click More Info to make sure Windows 95 can
communicate with the modem. Clicking More Info causes
Windows 95 to send commands to and receive responses from the
modem and to display information about the modems COM port.
9. Write down the modems port, interrupt, address, and highest
speed. You will need this information to set up any legacy
(nonWindows 95) communications software you install.
Port: COM ______ Interrupt:_______ Address:_______
Speed: _______
10. Click the General tab. Select Multi-Tech MT5634ZPX-PCI and
click Properties to review the modems default communications
settings. Do not change any settings unless you have special
requirements.
11. Click Dialing Properties and review your dialing settings. If you
are required to dial 9 to get an outside line, type 9 in the local and
long distance boxes. If you have call waiting service, disable it to
prevent it from interrupting a data or fax transmission. When
finished, click OK to exit the Modems Properties dialog box..