Filter
Top Products
Owner’s Manual
38 MT5634ZPX-PCI
Command: Qn Result Codes Enable/Disable
Values: n = 0 or 1
Default: 0
Description: Q0 Enable result codes.
Q1 Disable result codes.
Command: Sr=n Set Register Value
Values: r = S-register number; n varies
Default: None
Description: Set value of register Sr to value of n, where n is entered in
decimal format.
Command: Sr? Read Register Value
Values: r = S-register number
Default: None
Description: Read value of register Sr and display value in 3-digit
decimal form.
Command: Vn Result Code Format
Values: n = 0 or 1
Default: 1
Description: V0 Displays result codes as digits (terse response).
V1 Displays result codes as words (verbose response).
Command: Xn Result Code Selection
Values: n = 07
Default: 4
Description: X0 Basic result codes (e.g., CONNECT); does not look for dial
tone or busy signal.
X1 Extended result codes (CONNECT 56000 V42bis,
CONNECT 33600 V42bis, etc.); does not look for dial tone
or busy signal.
X2 Extended result codes with NO DIALTONE; does not look
for busy signal.
X3 Extended result codes with BUSY; does not look for dial
tone.
X4 Extended result codes with NO DIALTONE and BUSY.
X5 Extended result codes with NO DIALTONE and BUSY.
X6 Extended result codes with NO DIALTONE and BUSY.
X7 Basic result codes with NO DIALTONE and BUSY.