Filter
Top Products
2 Installation
MT5634ZPX-PCI 21
To Remove Previous Modem from Windows 95
If your MultiModemZPX-PCI replaces another modem, the previous
modem installation remains in Windows even after you install the new
modem, and the old modem is selected in HyperTerminal and other
Windows 95 applications. Although you can change the application
connection descriptions one at a time, it is easier to force Windows 95
applications to use the MultiModemZPX-PCI by removing the
previous modem installation from Windows.
1. Select Start, Settings, and then Control Panel.
2. Double-click the Modems icon to open the Modems Properties
dialog box.
3. In the list box, select the old modem.
4. Click Remove and then click Close.
5. The next time you dial a HyperTerminal connection, it selects
your new modem and asks you to confirm the selection.
Is Your MultiModemZPX-PCI Ready for Use?
If youre an experienced modem user, you may want only to check
your modems settings for data compression, error correction, and so
on. You may find you can get moving quite quickly if you just issue
the AT&V<cr> command. This command lists how your modem
currently is configured, the stored (user) profiles, and the first four
stored telephone numbers. If you come across a setting youre unsure
of, refer to Chapter 3 of this manual for AT command and S-register
explanations and defaults.
If youre a novice, please continue to the next sections of this chapter.