Filter
Top Products
Owner’s Manual
54 MT5634ZPX-PCI
If using legacy software, the COM port setting may not match the
COM port that Windows 95 assigned. Compare the COM port
setting in your software to the COM port reported in the Diagnostics
tab of the Modems Properties sheet. (Select Start, Settings, Control
Panel, Modems, and then Diagnostics.)
Another expansion card such as a bus mouse or sound card may be
using the same COM port, memory address, or interrupt request
(IRQ) as your modem. On the Windows 95 desktop, right-click My
Computer and select Properties, Device Manager, and Ports. Then
double-click the port where your modem is connected.
In the ports Properties sheet, click the Resources tab to view the
ports Input/Output range and Interrupt Request. If another device is
using the same address range or IRQ, it appears in the Conflicting
Device List. Resources are assinged at power up by the computers
BIOS. Windows cannot change these resources. If the resources
assigned to the MultiModemZPX-PCI conflict with the resources of
another device, the resources of the second device have to be
changed.
Select the port the conflicting device is on and change it so othe
conflict is resolved. If you need to change switches or jumpers on
the conflicting device, refer to the devices documentation.
The modem may be defective. If you have another
MultiModemZPX-PCI, try swapping modems. If the problem goes
away, the first modem possibly is defective. Call Technical Support
for assistance (see Chapter 5).