Filter
Top Products
4 AT Commands, S-Registers, and Result Codes
44
MultiModemZPX User Guide
88 DELAYED Delay is in effect for the dialed number
89 BLACKLISTED Dialed number is blacklisted
90 BLACKLIST FULL Blacklist is full
100 CONNECT 28000 * Connected at 28000 bps, 56K rate
101 CONNECT 29333 * Connected at 29333 bps, 56K rate
102 CONNECT 30666 * Connected at 30666 bps, 56K rate
103 CONNECT 33333 * Connected at 33333 bps, 56K rate
104 CONNECT 34666 * Connected at 34666 bps, 56K rate
105 CONNECT 37333 * Connected at 37333 bps, 56K rate
106 CONNECT 38666 * Connected at 38666 bps, 56K rate
107 CONNECT 41333 * Connected at 41333 bps, 56K rate
108 CONNECT 42666 * Connected at 42666 bps, 56K rate
109 CONNECT 45333 * Connected at 45333 bps, 56K rate
110 CONNECT 46666 * Connected at 46666 bps, 56K rate
111 CONNECT 49333 * Connected at 49333 bps, 56K rate
112 CONNECT 50666 * Connected at 50666 bps, 56K rate
113 CONNECT 53333 * Connected at 53333 bps, 56K rate
114 CONNECT 54666 * Connected at 54666 bps, 56K rate
* When the extended result code configuration option is enabled, one of the following codes is append-
ed to the result code, depending on the type of error control connection:
V42bis – V.42 error control (LAP-M) and V.42bis data compression
V42 – V.42 error control (LAP-M) only
MNP5 – MNP 4 error control and MNP 5 data compression
MNP4 – MNP 4 error control only
NoEC – No error control protocol
Terse Verbose Description