Muratec MFX-1950 All in One Printer User Manual


 
8-2 sp e c I a L f e a t u r e s
Soft keys
The soft key is a shortcut key. You can assign a frequent-use function to a soft key which
then activates or deactivates that function by pressing the key.
When the function assigned to the soft key is activated, the light above the soft key will
illuminate. However, in some cases, depending on the function, the light will not illumi-
nate. (See table below.)
The default setting for soft keys differs between MFX-1950 and F-315.
MFX-1950 control panel
Soft key 1 Soft key 2 Soft key 3
Functions you can assign to a soft key
The following table lists the functions you can assign to the soft key.
Function name Descriptions
Light indi-
cation
Reference
page
Sort Copy
On /Off setting for sort copying. on 7-5
Combine
On /Off setting for combined copying. on 7-8
Zoom
Used to adjust a zoom ratio by 1% increments. on 7-4
Broadcast
Used to make broadcasting. 4-12
Address Entry
Note 1
Used to enter an e-mail address.
Report
On /Off setting for print the transmit confirma-
tion report.
on 11-5
Monitor
Used to obtain a dial tone for on-hook dialing. on
Pause /Dial Opt.
Used to enter a dialing character. 3-2
Delayed
Used to make a delayed transmission. 4-13
Batch Tx
Used to store a document for batch transmission. 4-14
Select TTI
Used to select the TTI or to disable the TTI on
your transmission.
on 4-17
Select Line
Note 2
Used to select telephone line when sending a fax.
Cover Page
On /Off setting for cover page. on 4-20
Fax Forward
On /Off setting for fax forward. on 5-12
Fax & Copy
On /Off setting for Fax&Copy. on 4-19
Security
On /Off setting for security reception. on 9-3
Separator page
On /Off setting for separator page. on 5-14
Memory Tx
On /Off setting for memory transmission. on 4-3
Auto Rx
On /Off setting for automatic reception. on 5-2
F-code Tx
Used to make an F-code transmission. 6-11
F-code Polling
Used to make an F-code polling. 6-12
Polling
Used to make a polling reception. 5-11