Muratec MFX-1950 All in One Printer User Manual


 
9-7se c u r I t y f e a t u r e s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
se c u r I t y f e a t u r e s
Performing a batch transmission while using the PIN mask
NOTE: The following instructions presume you are familiar with how to set and use both
your machine’s autodialer and the batch transmission feature. If you need to review,
see pages 3-1 to 3-12 for more on the autodialer and/or pages 4-14 to 4-16 for more
on batch transmission.
If you chose “Mode 1” or “Mode 2”
NOTE: Any autodialer number you use with batch transmission must include the PIN. (To
review how to include this information in an autodialer number, review the Mode 1
instructions under “Autodialing while using the PIN mask,” page 9-5.)
Before sending a batch transmission for the first time, you must store the PIN within its
batch box.
1
Follow the steps for creating or modifying a batch box (page 4-14).
The machine asks for the fax number.
1:Fax Number
_
2
Enter an autodialer number or use the numeric keys to manually enter the fax num-
ber, to which the batch transmission should go.
NOTE: If you are entering a number using the numeric keys, enter the fax number, followed
by the <
*
> key and then the PIN.
3
Press <Enter> to save the setting.
4
Continue with the steps for creating or modifying a batch box.
Now you can perform a batch transmission to this box while the PIN mask is activated.