Muratec MFX-1950 All in One Printer User Manual


 
4-22 se n d I n G f a x e s
Sending documents to an e-mail gateway (fax server)
When this feature is activated, you can send documents to an e-mail gateway (fax
server) by simply entering the fax number. The machine will automatically add a prefix
and suffix to the fax number you have entered and send it to the e-mail gateway.
NOTE: •ThisfunctionisavailableonlyfortheMFX-1950.
•Tousethisfunction,theoptionalNIC(NetworkInterfaceCard)isrequired.
The following functions are not able to combine with sending faxes using the e-
mail gateway:
- Real time transmission
- Polling
- F-code transmission or F-code polling
- Manual line selection (This function is only available when the optional
second phone line module is attached.)
Setting the e-mail gateway feature
1
Press <Menu>, <2>, <2>, <1>, <9>, <Enter>.
E-mail Gateway :Off
/
/Enter
2
Use the cursor key to select “On”, then press <Enter>.
E-mail Gateway :On
/
/Enter
If you want the machine to always send fax documents to an e-mail gateway, select
“On”. Otherwise, select “Off”.
3
Enter the prefix that should added before the fax number by using the numeric keys
(up to 32 characters), and press <Enter>.
(For example, “Fax=”)
Prex ;Upper
_
4
Enter the suffix that should be added after the fax number (up to 48 characters) and
press <Enter> to save the setting.
(For example, “@domain name”)
Sufx ;Upper
_
5
Press <Reset> to go back to the standby mode.
NOTE: Total characters of prefix, fax number and suffix should be within 50 characters. For
specific prefix and suffix information, please refer to the e-mail gateway documenta-
tion.