Filter
Top Products
8-3sp e c I a L f e a t u r e s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
sp e c I a L f e a t u r e s
Function name Descriptions
Light indi-
cation
Reference
page
Dial Prefix
Used to enter the “/N” symbol. — 4-21
Bypass
Used to set the paper size on the bypass tray. — 2-16
Duplex Copy
Note 3
Used to set the duplex copy. on 7-9
Page Counter
Displays total printed and scanned pages. — 8-8
Energy Save
Switches to the energy save mode immediately. on —
Online
Cancels PC printing. on
Note 4
Mode Switch
Switches the machine’s mode. — 2-2
Note 1: The optional NIC (Network Interface Card) is required.
Note 2: The optional 2nd phone kit is required.
Note 3: The duplex copy is available only for MFX-1950.
Note 4: For details of PC printing, refer to the PDF manual on the GDI Printer/Scanner Driver CD supplied
with the machine.
The following functions are the default settings:
MFX-1950 F-315
Soft key 1 Sort Report
Soft key 2 Bypass Monitor
Soft key 3 Combine Pause /Dial Opt.
NOTE: When “Report”, “Fax & Copy”, “Memory Tx”, “Cover Page” or “Select TTI” are
selected, the function is only valid for the transmission that follows. Once that
transmission is complete, the setting returns to its default setting. If you want to
change the default setting, see “User settings” on pages 10-1 to 10-7.
Programming a soft key
1
Press <Menu>, <2>, <1>, <0>, <3>, then <Enter>.
Select Soft Key No.
1:Sort Copy
The machine shows the function currently assigned to the soft key.
2
Press <q> or <p> to select the soft key (1 to 3) you want to change.
3
Press <Enter>.
1:Sort Copy
/
/Enter
4
Press <q> or <p> to select the function you want to assign.
5
Press <Enter>.
6
If you want to program another soft key, repeat this procedure from step 2.
To exit the operation, press <Reset>.
7
Use the soft key labels supplied with your machine to label the soft key for easy refer-
ence.
NOTE: The same function can not be assigned to more than one soft key.