Filter
Top Products
CE-05171N page 15 of 44
6.0 Using the C3-3 Display to View and Configure the Centurion
Controller Settings
The Murphy C3-3 Display module is a highly integrated opera-
tor interface specially programmed to complement and sup-
port Centurion controller. The primary purpose of C3-3
Display is to display operational and configuration parameters
and provide access to modify the configuration parameters
stored in the Centurion controller.
6.1 Features
• Power
– 10 - 32 VDC (LED active indication)
– Storage power able to withstand 12V crank
• Package and Design
– Same 5 x 5 design as annunciators
– 12 key keypad
• Familiar annunciator keys
• Easy navigation keys
– 128 x 64 graphic backlit display
– Configurable using PC Software
– Field Upgradeable (flash bootloader)
• Communications
– LED active indication for each port
– RS232/485 (Modbus Master)
– RS232/485/USB 1.1 Compliant Port
• Download Configuration/Monitoring
• Approvals
– Approvals for CSA, CLASS 1, DIVISION 2, Groups B, C and D are pending.
66..11..11 KKeeyyppaadd DDeessccrriippttiioonn aanndd NNaavviiggaattiioonn
The keypad for the C3-3 Display has 12 keys. The
following table generally describes the keys and
their function for each of the three screen types:
• Operating status screens
• Setup screens (Password required)
• Edit screens (Password required)
Many of the keys have a modified action relative to
the current location of the cursor and the current
page being displayed.
HOME
Fn
RESET
ESC
ACK
SETUP
ENTER
RUN
STOP
TEST
TIMER
“0”
COOLER TEMPERATURE 105° F
LOW ENGINE OIL LEVEL
REMOTE ▼▲ 0000.3H
WARMUP B2 TIME-140
___________________________________
___________________________________