Filter
Top Products
24
1 INSTALLATION
• In case of using this LCD monitor with an arm-stand in an office
workspace, the arm-stand shall be chosen and used carefully:
-Use only an approved arm-stand (e.g. GS).
-The arm-stand shall have sufficient stability (mechanical firmness)
due to the load with this monitor included the optional parts which
we recommend. (suitable for at least 8.0 kg)
-The arm-stand shall remain in that position where it is manually
moved.
-The arm-stand shall have the ability to be tilted the monitor
forward and backward.
-The height of the upper row should be
500 mm or less in the lowest position of the
arm-stand.
(Example)
• Use the VESA approved arm-stand.
-The LCD panel requires 75 mm x 75 mm or
100 x 100 mm hole spacing on the arm
mounting pad.
-The arm-stand should be able to support
an object weighing 8.0 kg.
(7)Plug the other end of the cable into the video connector on the rear of
the PC.
Standard PC graphics board
75 mm x 75 mm/
100 mm x 100 mm
Standard PC
graphics board
500 mm