Filter
Top Products
Chapter 5 AT Serial Hardware Installation, Verification, and Configuration
© National Instruments Corporation 5-11 Serial Hardware and Software for Windows
Figure 5-5.
AT Serial Board Installation
7. Screw the AT serial board mounting bracket to the back panel
mounting rail of the computer.
8. Replace the cover.
9. Turn on your computer and start Windows Me/9x.
10. Watch for Windows Me/9x to display one or more New Hardware
Found dialog boxes. In the dialog box, select Windows Default
Driver and click on OK.
If no New Hardware Found dialog box appears, refer to the Forcing
Windows to Detect Your Hardware sectioninAppendixD,
Troubleshooting and Common Questions.
The serial hardware installation is complete. Continue to the next section,
Verify the Installation.
1PC 2ATSocket 3 AT Serial Card
1
2
3