National Instruments PXITM Computer Hardware User Manual


 
Index
© National Instruments Corporation I-3 Serial Hardware and Software for Windows
determining port associated with COMx
Windows 2000, D-4
Windows Me/9x, 4-12, 5-14, D-15
Windows NT, 4-18, 5-21, D-22
determining type of serial hardware installed
Windows 2000, D-4
Windows Me/9x,D-14
Windows NT, D-22
determining version of NI-Serial software
installed
Windows 2000, D-4
Windows Me/9x,D-15
Windows NT, D-22
development tools for saving time, 1-8
Device Manager for AT serial board ports
(figure),5-4,5-13
Device Manager for PCI serial board ports
(figure),2-4,2-13
Device Managerfor PCMCIA serialcard ports
(figure),4-4,4-11
Device Manager for PXI serial board ports
(figure),3-4,3-12
Device Manager ports list (figure), D-12, D-14
DeviceloControl, 6-4
input values (table), 6-5
setting transceiver mode with, 6-4
diagnostic messages
address test failed
Windows 2000, D-3
Windows Me/9x,D-10
Windows NT, D-21
diagnostic utility does not show all
installed ports
Windows Me/9x,D-10
Windows NT, D-21
interrupt test failed
Windows 2000, D-3
Windows Me/9x,D-10
Windows NT, D-22
no National Instruments serial port found
Windows 2000, D-3
Windows Me/9x,D-9
Windows NT, D-20
troubleshooting
Windows 2000, D-3
Windows Me/9x,D-9
Windows NT, D-20
diagnostic test failure
Windows 2000, D-4
Windows Me/9x,D-15
Windows NT, D-22
DOS-based addresses (table), D-15
DTE vs. DCE, B-7
DTE-to-DCE interface, B-7
straight-through cabling in (figure), B-7
DTE-to-DTE interface, B-7
null-modem cabling in (figure), B-7
duplex architectures, B-3
full duplex, B-3
half duplex, B-4
E
eight-port boards specifications
PCI, E-3
PXI, E-6
environmental characteristics
AT, E-11
PCI, E-4
PXI, E-7
F
FIFO buffer size, 2-23, 3-22, 4-21, 5-24
FIFO buffers, 2-9, 2-17, 3-8, 3-16, 4-8, 4-15,
5-9, 5-18
FIFO enabled, 2-22, 3-21, 4-21, 5-24
FIFO buffer size, 2-23, 3-22, 4-21, 5-24