NEC 5800/180Ra-7 Webcam User Manual


 
5-34
Problem Solving
Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message Description Action
0BB0 SMBIOS - SROM data
read error
Read error of SROM data
0BB1 SMBIOS - SROM data
checksum bad
Checksum for the SROM data
is incorrect.
Contact your service representative.
0BC0 POST detected startup
failure of CPU #1.
CPU #1 failed to startup.
0BC1 POST detected startup
failure of CPU #2.
CPU #2 failed to startup.
0BC2 POST detected startup
failure of CPU #3.
CPU #3 failed to startup.
0BC3 POST detected startup
failure of CPU #4.
CPU #4 failed to startup.
0BC4 POST detected startup
failure of CPU #5.
CPU #5 failed to startup.
0BC5 POST detected startup
failure of CPU #6.
CPU #6 failed to startup.
0BC6 POST detected startup
failure of CPU #7.
CPU #7 failed to startup.
0BC7 POST detected startup
failure of CPU #8.
CPU #8 failed to startup.
Contact your service representative to
replace the failed CPU.
0BD0 1st SMBus device
address not
acknowledged.
No response was made to the
access to the 1st SMBus.
0BD1 1st SMBus device Error
detected.
An error was detected in the
access to the 1st SMBus.
0BD2 1st SMBus timeout. A timeout error occurred in the
access to the 1st SMBus.
0BD3 2nd SMBus device
address not
acknowledged.
No response was made to the
access to the 2nd SMBus.
0BD4 2nd SMBus device Error
detected.
An error was detected in the
access to the 2nd SMBus.
0BD5 2nd SMBus timeout. A timeout error occurred in the
access to the 2nd SMBus.
0BD6 3rd SMBus device
address not
acknowledged.
No response was made to the
access to the 3rd SMBus.
0BD7 3rd SMBus device Error
detected.
An error was detected in the
access to the 3rd SMBus.
0BD8 3rd SMBus timeout. A timeout error occurred in the
access to the 3rd SMBus.
0BD9 4th SMBus device
address not
acknowledged.
No response was made to the
access to the 4th SMBus.
Contact your service representative to
replace the board indicated in the
system event log.