Filter
Top Products
YML9WMAXXN ADSL2+ Wireless N300 Modem Router with VoIP User Guide
www.netcomm.com.au 17
NetComm Gateway
TM
Series - ADSL2+ Wireless N300 Modem Router with VoIP
6: After entering your settings, select Next. The following screen appears.
This screen allows the user to congure the LAN interface IP address, subnet mask and DHCP server. If the user would like this router to
assign dynamic IP address, DNS server and default gateways to other LAN devices, select the button Enable DHCP server and enter the
Start and End IP addresses and DHCP leased time.
To congure a secondary IP address for the LAN port, tick the checkbox shown.
7: Click Next to continue. To enable the wireless function, select the radio button (as shown), input a new SSID (if desired) and click
Next.
8: Click Next to display the WAN Setup-Summary screen that presents the entire conguration summary. Click Save/Reboot if the
settings are correct. Click Back if you wish to modify the settings.
9: After clicking Save/Reboot, the router will save the conguration to ash memory and reboot. The Web UI will not respond until
the system is brought up again. After the system is up, the Web UI will refresh to the Home screen automatically. The router is
ready for operation when the LED indicators display as described in Section 1.3