YML9WMAXXN ADSL2+ Wireless N300 Modem Router with VoIP User Guide
www.netcomm.com.au 23
NetComm Gateway
TM
Series - ADSL2+ Wireless N300 Modem Router with VoIP
The following screen appears. To use the bridge service, tick the Enable Bridge Service checkbox and enter a service name (user dened).
5: Click the Next button to continue. Enter the IP address for the LAN interface. The default IP address is 192.168.1.1. The LAN IP
interface in bridge operating mode is needed for local users to manage the router. Notice that there is no IP address for the WAN
interface in bridge mode, and technical support cannot access the router remotely.
6: Click Next to continue. To enable the wireless function, select the radio button (as shown), input a new SSID (if desired) and click
Next.
The following screen will be displayed.
7: The WAN Setup-Summary screen presents the entire conguration summary. After clicking Save/Reboot, the router will save the
conguration to the ash memory, and reboot. Click Back if you wish to modify the settings. The Web UI will not respond until the
system is brought up again. After the system is up, the Web UI will refresh to the Device Info screen automatically.