NetComm N300 Network Router User Manual


 
ADSL2+ Wireless N300 Modem Router with VoIP User Guide YML9WMAXXN
40 www.netcomm.com.au
Management
7.1 Device Settings
The Device Settings option allows you to back up your settings to a le, retrieve the setting le, and restore the settings.
7.1.1 Backup
The Backup option under Management > Device Settings saves your router congurations to a le on your PC. Click Backup Settings
in the main menu. You will be prompted to dene the location of the backup le to save. After choosing the le location, click Backup
Settings. The le will then be saved to the assigned location.
7.1.2 Update
This option updates your router settings using a previously saved settings le.
7.1.3 Restore Default
Clicking the Restore Default Conguration option in the Restore Settings screen can restore the original factory installed settings (see
section 3.3 Default Settings).
NOTE 1: This option has the same effect as the hardware reset-to-default button on the rear panel of the router. The device board hardware and the boot loader support the
reset to default button. If the reset button is pressed for more than 10 seconds, the conguration data will be erased.
NOTE 2: Restoring system settings requires a system reboot. The current Web UI session must be closed and restarted. Before restarting it, the IP conguration may need to
be congured with a static IP address.
After the Restore Default Conguration button is selected, the following screen appears. Close the window and wait for 2 minutes
before reopening your web browser. If necessary, recongure your PC IP address to match your new conguration.
7.1.4 Update Firmware
The Update rmware screen allows you to update the rmware of the device. Manual rmware upgrades from a locally stored le can be
performed using the following screen. Your ISP will provide this le to you, if necessary.