Filter
Top Products
ADSL2+ Wireless N300 Modem Router with VoIP User Guide YML9WMAXXN
20 www.netcomm.com.au
The following screen will display.
8: The WAN Setup-Summary screen presents the entire conguration summary. After clicking Save/Reboot, the router will save the
conguration to ash memory and reboot. Click Back if you wish to modify the settings. The Web UI will not respond until the
system is brought up again. After the system is up, the Web UI will refresh to the Home screen automatically. The router is ready for
operation when the LED indicators display as described in Section 1.3
4.2.3 IP Over ATM
Follow Steps 1 through to 3 of Manual Quick Setup
4: Select the IP over ATM (IPoA) radio button and click Next.
The following screen appears.
NOTE: DHCP is not supported over IPoA. The user must enter the IP address or WAN interface for the default gateway setup and the DNS server addresses provided by the
ISP.