NetComm N300 Network Router User Manual


 
ADSL2+ Wireless N300 Modem Router with VoIP User Guide YML9WMAXXN
50 www.netcomm.com.au
8.3 QoS Classication
Quality of Service (QoS) can provide different priority to different users or data ows, or guarantee a certain level of performance to a data
ow in accordance with requests from Queue Prioritization.
NOTE: QoS must be enabled in at least one PVC to display this option. (see Advanced Setup - WAN for detailed PVC setup instructions).
8.3.1 QueueManagementConguration
To Enable QoS tick the checkbox, select Default DSCP Mark and click Save/Apply.
Select Default Differentiated Services Code Point (DSCP) Mark
With this drop-down box you can assign a DSCP mark in the Internet Protocol (IP) header that species the per hop behavior for a given
ow of incoming packets that do not match any other QoS rule.
8.3.2 QueueConguration
This function follows the Differentiated Services rule of IP QoS. You can create a new Queue rule by assigning an Interface, Enable/
Disable and Precedence. The router uses various queuing strategies to tailor performance to user requirements
Click Add to display the following screen.
Field Name Comment
QueueCongurationStatus: Enable or Disable the queue.
Queue: Assign queue to a specic network interface whose QoS is enabled.
Queue Precedence: Congure precedence for the queue. Lower integer values for precedence imply
higher priority for this queue relative to others.