Filter
Top Products
YML9WMAXXN ADSL2+ Wireless N300 Modem Router with VoIP User Guide
www.netcomm.com.au 59
NetComm Gateway
TM
Series - ADSL2+ Wireless N300 Modem Router with VoIP
9.4.2 WAN Statistics
WAN statistics screen shows the interface statistics for all WAN connections
Service Shows the service type
VPI/VCI Shows the values of the ATM VPI/VCI
Protocol Shows the connection type
Interface Shows connection interfaces
Received/
Transmitted
-
Bytes
Rx/TX (receive/transmit) packet in Byte
- Pkts Rx/TX (receive/transmit) packets
- Errs Rx/TX (receive/transmit) packets with errors
-
Drops
Rx/TX (receive/transmit) dropped packets
9.4.3 ATM Statistics
The gure below shows the ATM statistics screen when using ADSL.
Field Description
In Octets Number of received octets over the interface
Out Octets Number of transmitted octets over the interface
In Errors Number of cells dropped due to uncorrectable HEC errors
In Unknown Number of received cells discarded during cell header validation, including cells with
unrecognized VPI/VCI values, and cells with invalid cell header patterns. If cells with
undened PTI values are discarded, they are also counted here.
In Hec Errors Number of cells received with an ATM Cell Header HEX error
In Invalid Vpi Vci
Errors
Number of cells received with an unregistered VCC address.
In Port Not Enable
Errors
Number of cells received on a port that has not been enabled.
In PTI Errors Number of cells received with an ATM header Payload Type Indicator (PTI) error
In Idle Cells Number of idle cells received
In Circuit Type Errors Number of cells received with an illegal circuit type
In OAM RM CRC
Errors
Number of OAM and RM cells received with CRC errors
In GFC Errors Number of cells received with a non-zero GFC.