NetComm N300 Network Router User Manual


 
ADSL2+ Wireless N300 Modem Router with VoIP User Guide YML9WMAXXN
52 www.netcomm.com.au
8.4 Routing
8.4.1 Default Gateway
If the Enable Automatic Assigned Default Gateway checkbox is selected, this router will accept the rst received default gateway
assignment from the DHCP enabled PVC(s). If the checkbox is not selected, enter the static default gateway and/or WAN interface. Click
Save/Apply.
NOTE: After enabling Automatic Assigned Default Gateway, you must click the Save/Apply button to put it into effect. The router will reboot.
8.4.2 Static Route
This screen lists the congured static routes and allows for the conguration of static routes. Choose Add or Remove to congure the static
routes.
To add static route, click the Add button to display the following screen. Enter the destination network address, subnet mask,
gateway AND/OR available WAN interface then click Save/Apply to add the entry to the routing table.