Filter
Top Products
NB504 User Guide YML864Rev1
20 www.netcomm.com.au
5.2 Status
The Status page displays the router’s current status and configuration. All information is read-only.
1. LAN
This field displays the current settings or information for the LAN, including the MAC address, IP address
and Subnet Mask.
2. Wireless
This field displays basic information or status for wireless function, including Wireless Radio, SSID,
Channel, Mode, Wireless MAC address and IP address.
3. WAN
These parameters apply to the WAN port of the router, including MAC address, IP address, Subnet
Mask, Default Gateway, DNS server and WAN connection type. If PPPoE is chosen as the WAN
connection type, the Disconnect button will be shown here while you are accessing the Internet. You
can also cut the connection by clicking the button. If you have not connected to the Internet, just click
Connect to establish the connection.
4. Traffic Statistics
This field displays the router’s traffic statistics.
5. System Up Time
The amount of time from when the router was switched on or reset.