Filter
Top Products
NB504 User Guide YML864Rev1
84 www.netcomm.com.au
2. Configure TCP/IP for your computer
1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2) Double-click the Network icon, highlight the bound TCP/IP tab in the appearing Network window that
appears. An example is shown in the following figure:
Figure B-3 Configuration tab
3) Click on Properties. The following TCP/IP Properties window will display and the IP Address tab is
open on this window by default.
4) Now you have two ways to configure the TCP/IP protocol below:
• Assigned by DHCP Sever
a. Select Obtain an IP address automatically, as shown in the figure below:
Figure B-4 IP Address tab
b. Do not type anything into the New gateway field on the Gateway tab.