NetComm NB504 Network Router User Manual


 
YML864 Rev1 NB504 User GuideNB504 User Guide
www.netcomm.com.au 33
5.4.3 MAC Clone
You can configure the MAC address of the WAN port on this page, figure 5-13:
Figure 5-13 MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter, which is connected to your cable, DSL
modem or Ethernet during installation. Changes are rarely needed here.
WAN MAC Address - This field displays the current MAC address of the WAN port, which is used for the
WAN port. If your ISP requires that you register the MAC address, please enter the correct MAC address
into this field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
Your PC’s MAC Address - This field displays the MAC address of the PC that is managing the router. If
the MAC address is required, you can click the Clone MAC Address button and this MAC address will fill
in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value.
Click the Save button to save your settings.
Note:
1) Only the PC on your LAN can use the MAC Address Clone feature.
2) If you click the Save button, the router will prompt you to reboot.