Filter
Top Products
YML864 Rev1 NB504 User GuideNB504 User Guide
www.netcomm.com.au 31
8. If you choose PPTP, you should enter the following parameters (figure 5-12):
Figure 5-12 PPTP Settings
• User Name/Password - Enter the User Name and Password provided by your ISP. These fields are
case-sensitive.
• Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the ISP’s IP address or
the domain name.
If you choose static IP and enter the domain name, you should also enter the DNS assigned by your
ISP. And click the Save button.
Click the Connect button to connect immediately, Click the Disconnect button to disconnect
immediately.
• Connect on Demand - You can configure the router to disconnect from your Internet connection
after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the router to automatically re-establish your
connection as soon as you attempt to access the Internet again. If you wish to activate Connect on
Demand, click the radio button. If you want your Internet connection to remain active at all times,
enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you want to have
elapsed before your Internet connection terminates.
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are
visiting the Internet continually in the background.