Filter
Top Products
YML864 Rev1 NB504 User GuideNB504 User Guide
www.netcomm.com.au 47
5.7 Forwarding
Figure 5-24 The Forwarding menu
There are four submenus under the Forwarding menu (shown in figure 5-24): Virtual Servers, Port
Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.
The detailed explanations for each submenu are provided below.
5.7.1 Virtual Servers
Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual
server is defined as a service port, and all requests from the Internet to this service port will be redirected to
the computer specified by the server IP.
Any PC that was used for a virtual server must have a static or reserved IP Address because its IP Address
may change when using the DHCP function. You can set up virtual servers on this page, shown in figure
5-25:
Figure 5-25 Virtual Servers
• Service Port - The numbers of External Ports. You can type a service port or a range of service ports (the
format is XXX – YYY, XXX is Start port, YYY is End port).
• IP Address - The IP Address of the PC providing the service application.
• Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols supported by the
router).
• Status - The status of this entry either Enabled or Disabled.