NetComm NB504 Network Router User Manual


 
YML864 Rev1 NB504 User GuideNB504 User Guide
www.netcomm.com.au 25
3. If you choose PPPoE, you should enter the following parameters (figure 5-6):
Figure 5-6 WAN - PPPoE
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Connect on Demand - You can configure the router to disconnect your Internet connection after a
specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon
as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio
button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time
field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection
terminates.
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are
visiting the Internet continually in the background.
Connect Automatically - Connect automatically after the router is disconnected. To use this option,
click the radio button.
Time-based Connecting - You can configure the router to make it connect or disconnect based
on time. Enter the start time in HH:MM format for connecting and end time in HH:MM format for
disconnecting in the Period of Time fields.
Note: Only when you have configured the system time on System Tools -> Time page, will the Time-based Connecting function can
take effect.
Connect Manually - You can configure the router to make it connect or disconnect manually. After a
specified period of inactivity (Max Idle Time), the router will disconnect from the Internet connection,
and you will not be able to re-establish your connection automatically as soon as you attempt
to access the Internet again. To use this option, click the radio button. If you want your Internet
connection to remain active at all times, enter “0” in the Max Idle Time field. Otherwise, enter the
number time in minutes that you wish to have the Internet connecting last unless a new link is
requested.
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are
visiting the Internet continually in the background.