Filter
Top Products
FS728TP Smart Switch Software User Manual
5-89 Configuring the Device Using Your Browser
v2.0, November 2006
– CoS – Classifies traffic based on the CoS (VPT) tag value.
– DSCP – Classifies traffic based on the DSCP tag value.
– None – Indicates that Trust is not enabled on the device.
– Interface – Displays the interface for which the global QoS parameters are defined.
– Port – Selects the port for which the global QoS parameters are defined.
– LAG – Selects the LAG for which the global QoS parameters are defined.
– Default CoS – Determines the default CoS value for incoming packets for which a VLAN
tag is not defined.
– Restore Defaults – Restores the factory CoS default settings to the selected port.
– Checked – Restores the factory CoS default settings to the ports.
– Unchecked– Maintains the current CoS settings.
2. Select Enable in the Quality of Service field.
3. Define the Trust Mode field.
4. Click . Quality of Service is enabled on the device.