Filter
Top Products
FS728TP Smart Switch Software User Manual
5-121 Configuring the Device Using Your Browser
v2.0, November 2006
– VLAN ID – Specifies the VLAN ID.
– IGMP Snooping Status – Indicates if IGMP snooping is enabled on the VLAN. The
possible field values are:
– Enable – Enables IGMP Snooping on the VLAN.
– Disable – Disables IGMP Snooping on the VLAN.
– Auto-Learn – Indicates if Auto Learn is enabled on the device. If Auto Learn is enabled,
the devices automatically learns where other Multicast groups are located. Enables or
disables Auto Learn on the Ethernet device.The possible field values are:
– Enable – Enables auto learn.
– Disable – Disables auto learn.
– Host Timeout – Indicates the amount of time host waits to receive a message before
timing out. The default time is 260 seconds.
– MRouter Timeout – Indicates the amount of the time the Multicast router waits to receive
a message before it times out. The default value is 300 seconds.
– Leave Timeout – Indicates the amount of time the host waits, after requesting to leave the
IGMP group and not receiving a Join message from another station, before timing out. If a
Leave Timeout occurs, the switch notifies the Multicast device to stop sending traffic The
Leave Timeout value is either user-defined, or an immediate leave value. The default
timeout is 10 seconds.