Filter
Top Products
FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-94
v2.0, November 2006
Mapping CoS to Queues
The CoS to Queue Page contains fields for mapping CoS values to traffic queues. To map CoS
values to queues:
1. Click Switch > QoS > Mapping > CoS to Queue. The CoS to Queue Page opens:
Figure 5-61
The CoS to Queue Page contains the following fields:
– Class of Service – Specifies the CoS priority tag values, where zero is the lowest and 7 is
the highest.
– Queue – Defines the traffic forwarding queue to which the CoS priority is mapped. Four
traffic priority queues are supported. The lowest priority is 1 and the highest is four.
– Restore Defaults – Restores the device factory defaults for mapping CoS values to a
forwarding queue.
2. Define the queue number in the Queue field next to the required CoS value.
3. Click . The CoS value is mapped to a queue and the device is updated.