Filter
Top Products
FS728TP Smart Switch Software User Manual
5-53 Configuring the Device Using Your Browser
v2.0, November 2006
– Priority Level – Determines the port priority if the power supply is low. The field default
is low. For example, if the power supply is running at 99% usage, and port 1 is prioritized
as high, but port 3 is prioritized as low, port 1 is prioritized to receive power and port 3
may be denied power. The possible field values are:
– Low – Defines the PoE priority level as low. This is the default level.
– Medium – Defines the PoE priority level as Medium.
– High – Defines the PoE priority level as high. This is the highest PoE priority level
– Class – Indicates the amount of power assigned to the powered device connected to the
selected interface. The powered device classifies devices, and the devices use the
classification information. The field values are:
– Class 0 – Indicates that the maximum power level at the input of the Powered Device
is 15.4 watts.
– Class 1 – Indicates that the maximum power level at the input of the Powered Device
is 4.0 watts.
– Class 2 – Indicates that the maximum power level at the input of the Powered Device
is 7.0 watts.
– Class 3 – Indicates that the maximum power level at the input of the Powered Device
is 15.4 watts.
– Class 4 – Treated as Class 0.
– Output Voltage – Displays the Output Voltage in watts.
– Output Current (ma) – Displays the Output current in milli amps.
– Output Power (Watt) – Indicates the Output power in watts.
– Power Limit (Watt) –Indicates the power limits in watts.
– Status – Indicates if the port is enabled to work on PoE. The possible field values are:
– On – Indicates the device is delivering power to the interface.
– Off – Indicates the device is not delivering power to the interface.
– Test Fail – Indicates the powered device test has failed. For example, a port could not
be enabled and cannot be used to deliver power to the powered device.
– Testing – Indicates the powered device is being tested. For example, a powered device
is tested to confirm it is receiving power from the power supply.