Filter
Top Products
FS728TP Smart Switch Software User Manual
5-117 Configuring the Device Using Your Browser
v2.0, November 2006
2. Click . The global trap settings are defined and the device is updated.
Defining Trap Filter Settings
The Trap Filter Settings Page permits filtering traps based on OIDs. Each OID is linked to a
device feature or a portion of a feature. The Trap Filter Settings Page also allows network
managers to filter notifications.
To define SNMP Trap Filter settings:
1. Click Switch > Advanced > SNMP > Trap Filter Settings. The Trap Filter Settings Page
opens:
Figure 5-78
The Trap Filter Settings Page contains the following fields:
– Filter Name – Contains a list of user-defined notification filters.
– ID – Indicates the Trap Filter Settings Table entry number.
– Object Identifier Subtree – Displays the OID for which notifications are sent or blocked.
If a filter is attached to an OID, traps or informs are generated and sent to the trap
recipients. OIDs are selected from either the Select from field or the Object ID field.