Filter
Top Products
FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-46
v2.0, November 2006
Viewing Server Logs
The Server Logs Page contains information for viewing and configuring the remote log servers.
New log servers can be defined and the log severity sent to each server.
To open the Server Logs Page:
1. Click System > Logs > Server Logs. The Server Logs Page opens:
Figure 5-35
The Server Logs Page contains the following fields:
– ID – Displays the log entry in the Server Logs table.
– Server – Specifies the server’s IP address to which logs can be sent.
– UDP Port – Defines the UDP port to which the server logs are sent. The possible range is
1 - 65535. The default value is 514.
– Facility – Defines an application from which system logs are sent to the remote server.
Only one facility can be assigned to a single server. If a second facility level is assigned,
the first facility is overridden. All applications defined for a device utilize the same facility
on a server. The field default is Local 7. The possible field values are Local 0 - Local 7.
– Description – Displays the user-defined server description.