Filter
Top Products
FS728TP Smart Switch Software User Manual
5-61 Configuring the Device Using Your Browser
v2.0, November 2006
– 10 – Indicates the LAG is currently operating at 10 Mbps.
– 100 – Indicates the LAG is currently operating at 100 Mbps.
– 1000 – Indicates the LAG is currently operating at 1000 Mbps.
– Duplex Mode – Displays the port duplex mode. This field is configurable only when auto
negotiation is disabled and the port speed is set to 10M or 100M. This field cannot be
configured on LAGs. The possible field values are:
– Full – The interface supports transmission between the device and its link partner in
both directions simultaneously.
– Half – The interface supports transmission between the device and the client in only
one direction at a time.
– Auto Negotiation – Displays the auto negotiation status on the LAG. Auto Negotiation is
a protocol between two link partners that enables a port to advertise its transmission rate,
duplex mode, and flow control abilities to its partner.
– Back Pressure – Displays the Back Pressure mode on the Port. Back Pressure mode is
used with half duplex mode to disable ports from receiving messages. Back Pressure mode
is enabled by default.
– Flow Control – Displays the flow control status on the LAG. Operates when the port is in
full duplex mode. Enabled by default.