Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Switching Information 3-47
v1.0, May, 2008
2. Click Refresh to redisplay the page with the latest information from the switch.
3. Click Delete to disable Snooping Querier on the selected VLAN. This button is not visible
when a VLAN is not selected.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. If you configure a snooping querier for a VLAN, click Apply to apply the new settings to the
switch.
Figure 3-33
Table 3-31. IGMP Snooping Querier VLAN Configuration Fields
Field Description
VLAN ID Specifies VLAN ID for which the IGMP Snooping Querier is to be
enabled. Select New Entry to create a new VLAN ID for IGMP
Snooping. You can also set pre-configurable Snooping Querier
parameters.
Querier Election Participate
Mode
Enable or disable Querier Participate Mode. When this mode is
disabled, upon seeing another querier of same version in the VLAN, the
snooping querier moves to non-querier state.
When enabled, the snooping querier participates in querier election, in
which the least IP address operates as the querier in that VLAN. The
other querier moves to non-querier state.
Snooping Querier VLAN
Address
Specify the Snooping Querier Address to be used as the source
address in periodic IGMP queries sent on the specified VLAN.