Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Routing 4-3
v1.0, May, 2008
Figure 4-2 shows the VLAN Routing Wizard page with the Unit and LAG fields expanded to
show the ports. The page does not show the ports until you click the Unit or LAG link.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. If you change any of the settings on the page, click Apply to send the updated configuration to
the switch. Configuration changes take effect immediately.
Figure 4-2
Table 4-2. VLAN Routing Configuration Fields
Field Description
VLAN ID Enter the ID of a VLAN to configure for VLAN Routing.The range of the
VLAN ID is (1 to 4078).
VLAN Name A unique name for the VLAN.
LAG Enabled Select the check box to allow the ability to add selected ports to the
VLAN as a LAG. The default is No.
IP Address Enter an IP Address for the VLAN Routing Interface.
Network Mask Enter a Subnet Mask for the VLAN Routing Interface.
Unit 1 Click Unit 1 to display the ports on the switch. For each port, you can
click its associated box to add the port to the VLAN as a tagged (T) or
untagged (U) interface.
LAG Click LAG to view the available LAGs on the switch. Click the box
associated with the port to add the LAG to the VLAN as a tagged (T) or
untagged (U) interface.