Filter
Top Products
GS700TR Smart Switch Software Administration Manual
4-16 Configuring Routing
v1.0, May, 2008
2. Click Refresh to refresh the page with the most current data from the switch.
Global ARP Configuration
Use the Global ARP Configuration page to display and change the configuration parameters of
the ARP table.
To display the page:
1. Click the Advanced > Global ARP Configuration link from the Routing > ARP tab.
Table 4-9. Routing VLANs ARP Cache
Field Description
Interface The routing interface associated with the ARP entry.
IP Address Displays the associated IP address of a device on a subnet attached to
one of the switch's existing routing interfaces.
MAC Address Displays the unicast MAC address of the device.
Type The type of the ARP entry. Possible values are:
• Local. An ARP entry associated with one of the switch’s routing
interface’s MAC addresses.
• Gateway. A dynamic ARP entry whose IP address is that of a router.
• Static. An ARP entry configured by the user.
• Dynamic. An ARP entry which has been learned by the router.
Age Age since the entry was last refreshed in the ARP Table. The format is
hh:mm:ss.
Figure 4-8