Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Quality of Service 5-15
v1.0, May, 2008
2. Click Refresh to refresh the page with the most current data from the switch.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you change any of the settings on the page, click Apply to send the updated configuration to
the switch. Configuration changes take effect immediately.
Source IP Address Requires a packet’s source port IP address to match the address listed
here. In the IP Address field, enter a valid source IP address in dotted
decimal format.
Source Mask Enter a valid subnet mask to determine which bits in the IP address are
significant. Note that this is not a wildcard mask.
Source L4 Port Requires a packet’s TCP/UDP source port to match the port you select.
Select the desired L4 keyword from the list on which the rule can be
based. If you select Other, the screen refreshes and a Port ID field
appears. E
nter a user-defined Port ID by which packets are matched to the
rule.
Destination IP Address Requires a packet’s destination port IP address to match the address
listed here. In the IP Address field, enter a valid destination IP address
in dotted decimal format.
Destination Mask Enter a valid subnet mask to determine which bits in the IP address are
significant. Note that this is not a wildcard mask.
Destination L4 Port Requires a packet’s TCP/UDP destination port to match the port you
select. Select the desired L4 keyword from the list on which the rule can
be based. If you select Other, the screen refreshes and a Port ID field
appears. E
nter a user-defined Port ID by which packets are matched to the
rule.
IP DSCP Matches the packet’s DSCP to the class criteria’s when selected.
Select the DSCP type from the dropdown menu. or enter a DSCP value
to match. If you select Other, enter a custom value in the DSCP Value
field that appears.
IP Precedence Matches the packet’s IP Precedence value to the class criteria’s when
Enter a value in the range of 0-7.
IP TOS Matches the packet’s Type of Service bits in the IP header to the class
criteria’s when selected and a value is entered. In the TOS Bits field,
enter a two-digit hexadecimal number to match the bits in a packet’s
TOS field. In the TOS Mask field, specify the bit positions that are used
for comparison against the IP TOS field in a packet.
Table 5-8. Diffserv Class Configuration Fields
Field Description