Filter
Top Products
GS700TR Smart Switch Software Administration Manual
6-48 Managing Device Security
v1.0, May, 2008
IP Rules
Use the IP Rules page to define rules for IP-based standard ACLs. The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or discarded.
To display the IP Rules page:
1. Click Security > ACL, then click the Advanced > IP Rules link.
2. To add an IP ACL rule, select the ACL ID to add the rule to, complete the fields in the Basic
ACL Rule Table and then click Add.
3. To delete an IP rule, select the check box associated with the rule, and then click Delete.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. If you change any of the settings on the page, click Apply to send the updated configuration to
the switch. Configuration changes take effect immediately.
Note: There is an implicit “deny all” rule at the end of an ACL list. This means that if an
ACL is applied to a packet and if none of the explicit rules match, then the final
implicit “deny all” rule applies and the packet is dropped.
Figure 6-30