Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Managing Device Security 6-57
v1.0, May, 2008
2. Click Refresh to update the page with the most current information.
3. To delete a VLAN ACL, select the ACL, then click Delete.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. If you make changes to the page, click Apply to apply the changes to the system.
ACL Interface/VLAN Summary
Use this page to view all ports and VLANs to which an ACL has been applied.
To access the page:
MAC ACL The dropdown menu contains all configured MAC ACLs. Select the MAC ACL
to apply to the interface. This field is only visible if you select MAC ACL as the
ACL Type.
Sequence Number Assigns the priority of this ACL. If more than one ACL is applied to an interface,
then the match criteria for the highest sequence ACLs are checked first. A lower
number indicates higher priority. If a sequence number is already in use for this
interface and direction, the specified access list replaces the currently attached
access list using that sequence number. If you do not specify a sequence
number, a sequence number that is one greater than the highest sequence
number currently in use for this interface and direction is used. The valid range
is 1-4294967295.
Table 6-39. VLAN-Based ACL Configuration
Field Description